TANKLESS WATER HEATERS / NOISE
LISTEN TO WHAT THE HEATER IS TELLING YOU.
A new or louder sound can come from normal ignition or fan cycles, water flow, vibration, scale, or a developing equipment issue. The timing and type of noise help guide a careful diagnosis.
TANKLESS WATER HEATERS / SPECIALTY SERVICE
UNDERSTAND THE ISSUE
A brief click at startup has a different context from a persistent rattle, high-pitched whine, or vibration that continues during hot-water use. Loose mounting, nearby piping contact, flow conditions, and internal operation can all contribute. Note whether the sound changes with a shower, sink, or appliance and whether a code or temperature change appears. Do not remove the cover to investigate.
Matthew LuongMy tankless water heater was discharging water randomly. I had no idea what the issue was. But Sergio came by ASAP and helped diagnosed what could be the issue. It was determined that my water pressure regulator was broken and the water pressure was 140 psi. He replaced it with a new one the same day within an hour, and lowered the pressure to 50 psi, and no more water is discharging from my water heater anymore.Read review on Google
Matthew GussinI highly recommend Best Quality Plumbing Services. They repaired our tankless water heater promptly and did a thorough, professional job. The team was courteous, knowledgeable, and cleaned everything up when they finished. Excellent service from start to finish!Read review on Google
hope JeonWe called Best plumbers. He came out on the same day and give us very reasonable estimate and service was great. He even came out on the Saturday and flush the tankless water heater. Best plumbers in sylmar area!Read review on Google
WHAT WE'LL CHECK
We ask when the noise starts and stops, whether one fixture triggers it, and whether temperature or flow has changed. We inspect accessible piping, mounting, valves, and visible vent or drain connections, then consider the unit’s indicators and service history. That context helps distinguish a plumbing vibration from an equipment condition.
If piping contact, mounting, or a nearby connection is the source, a focused correction may resolve the sound without replacing the heater.
A persistent sound tied to ignition, flow, a warning code, or shutdown may require model-specific service and a repair decision.
ESTIMATE DETAILS
The work depends on the sound source and what the inspection finds:
Request a free estimateA noise at one fixture or only during startup points to different checks than an all-cycle sound.
Accessible pipe vibration differs from diagnosis of a fan, burner, or other heater component.
Codes, temperature changes, restricted flow, and repeat shutdowns can broaden the inspection scope.
WHAT TO EXPECT
We'll explain what we found, what the work involves, and the price before you decide. An online request starts the conversation; we'll confirm the appointment with you.
Share a recording if available and note the fixture, timing, duration, and related symptoms.
We review accessible plumbing and the heater’s visible status without assuming that every sound signals failure.
We explain whether the finding points to a plumbing adjustment or further model-specific equipment diagnosis.
GOOD TO KNOW
Have a question about your plumbing? These answers cover what we’re often asked.
Some models make brief operating sounds, but a new, persistent, or changing click should be considered with any codes or hot-water changes.
The sound may relate to flow, pipe vibration, scale, or heater operation. The timing and unit indicators help narrow the cause.
Noise alone does not establish a hazard. If you smell gas, leave and call the utility or emergency services from a safe place; do not manipulate switches or controls.
No. Internal inspection involves equipment and fuel or electrical components. Describe the sound and have the unit assessed professionally.
Learn more about this service and where we work.
CLOSE TO HOME
Based in Sylmar and serving homes and businesses across 22 nearby communities.
Map data © OpenStreetMap contributors
The circle is an approximate 30-mile guide from our Sylmar office, not a precise service boundary. Call to confirm service at your address.
READY WHEN YOU ARE
Share a few details with our team and we’ll contact you to discuss the next step. Sending a request does not confirm an appointment.
Form not loading? Call (818) 282-5846 or open our contact page.
